hp insight management wbem providers software testing

#HP INSIGHT MANAGEMENT WBEM PROVIDERS SOFTWARE TESTING PLUS#
#HP INSIGHT MANAGEMENT WBEM PROVIDERS SOFTWARE TESTING DOWNLOAD#

Show channels independently (default) : Show a graph for each channel.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.ĭefine how different channels are shown for this sensor: The available options depend on what channels are available for this sensor.

In the device tree, the last value of the primary channel is always displayed below the sensor's name. Select a channel from the list to define it as the primary channel. For some sensors, you can explicitly define the monitoring target in the sensor settings. Usually, a sensor connects to the IP Address/DNS Name of the parent device. Choose from the lowest priority ( ) to the highest priority ( ). The highest priority is at the top of a list. This setting determines the position of the sensor in lists. The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

#HP INSIGHT MANAGEMENT WBEM PROVIDERS SOFTWARE TESTING PLUS#

It is not possible to enter tags with a leading plus ( +) or minus ( -) sign, nor tags with parentheses ( ()) or angle brackets ( ).įor performance reasons, it can take some minutes until you can filter for new tags that you added. You can use tags to group objects and use tag-filtered views later on. Confirm each tag with the Spacebar key, a comma, or the Enter key. You cannot change it.Įnter one or more tags. This setting is for your information only. Shows tags that the sensor inherits from its parent device, parent group, and parent probe. You can change nearly all settings on the sensor's Settings tab after creation.Ĭlick the Settings tab of a sensor to change its settings. It only shows the settings that are required to create the sensor.

The Add Sensor dialog appears when you manually add a new sensor to a device. For Gen10 servers, use the HPE iLO interface as parent device for this sensor. You can set this up in the iLO configuration interface under Administration | Management | SNMP Settings. We recommend that you use the Agentless Management feature with configured SNMP. If this sensor throws an error that it cannot find 'such device types', create a device that points to the address of the HPE iLO interface (if available) and add the sensor to this device.

#HP INSIGHT MANAGEMENT WBEM PROVIDERS SOFTWARE TESTING DOWNLOAD#

For Gen10 servers, this sensor no longer requires HPE system management tools.įor more details and download links, see the Knowledge Base: Monitor HP ProLiant via SNMP?įor Gen9 servers or earlier, some of the HPE object identifiers (OID) that this sensor uses are only accessible via the iLO interface. To receive SNMP data from redundant array of independent disks (RAID) controllers, you additionally need HPE Insight Management Agents. įor Gen9 servers or earlier, this sensor needs a specific HPE system management tool to be installed on the target device to report data via SNMP: HPE Insight Management Agents. You can change the behavior of a channel by editing the lookup file that the channel uses. This means that possible states are defined in a lookup file. This sensor uses lookups to determine the status values of one or more channels.This sensor has a low performance impact.This sensor supports the IPv6 protocol.We recommend that you use at least iLO 4. This sensor supports monitoring iLO as of iLO version 3.In this case, deactivate the respective controllers in the HPE ProLiant BIOS to avoid sensor errors. Redundant array of independent disks (RAID) controllers that have no hard disks assigned might cause the Down status.You can change these limits individually in the channel settings. This sensor has predefined limits for temperatures and broken frames.For Gen10 servers: Use the HPE Integrated Lights Out (iLO) interface as the parent device for this sensor.For Gen9 servers or earlier: This sensor requires HPE Insight Management Agents and HPE Insight Management WBEM Providers to be installed on the target device.Spanish : Salud de sistema HPE ProLiant (SNMP).Simplified Chinese : SNMP HPE ProLiant 系统运行状况.

Portuguese : Funcionamento do sistema HPE ProLiant (SNMP).

German : SNMP HPE ProLiant Systemzustand.

French : HPE ProLiant état du système (SNMP).

Dutch : SNMP HPE ProLiant Systeemstatus.For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Hp insight management wbem providers software testing